2 de abril de 2021

Technical Description of New Lubricant 210A

With the increasing requirements of environmental protection, lubricants containing metal soaps can no longer be the direction, can be completely removed from the pure organic lubricants into the mainstream. The initial development of pure organic lubricants for the paraffin wax and its variants, due to high molecular weight, its softening point temperature of more than 130 […]

Technical Description of New Lubricant 210A Leia mais »

Project Development Reports of Lubricants

1. Basic information Lubricants are being developed with high lubricity to reduce the compression tonnage and release pressure and to compensate for the lack of compressibility of the base powder. However, these lubricants have low melting points and tend to agglomerate during the compounding process, especially when used in hot weather, which limits their use

Project Development Reports of Lubricants Leia mais »

Powder Metallurgy Industry Shows Six Trends

First, the positioning of powder metallurgy manufacturers gradually established. The positioning of the company in the high, medium, and low-grade commodity markets is gradually established. Companies with considerable size and skills to focus on high-end commodity stores, usually companies or small companies in low-end commodity stores to open competition. This decomposition is conducive to the progress

Powder Metallurgy Industry Shows Six Trends Leia mais »

Spheroidization Rate and Spheroidal Grade of Graphite

Spheroidization Rate and Spheroidal Grade of Graphite in Ductile Cast Iron.The spheronization rate and spheronization grade are assessed according to GB/T9441-1988 “Ductile Iron Metallographic Inspection”, which divides the spheronization grade into 6 grades. Firstly, the whole inspected surface is observed, and then, starting from the worst area, 5 fields of view are observed consecutively, and

Spheroidization Rate and Spheroidal Grade of Graphite Leia mais »

Global Automotive Components Industry Status Analysis 2018

The development of the auto parts industry is an important related industry of automobile vehicle manufacturing, through the operation and ranking of the global Top 100 auto parts enterprises in 2017 to sum up the situation, Japan as an auto manufacturing powerhouse, in 2017, the number of Japanese enterprises and operating income are ranked first

Global Automotive Components Industry Status Analysis 2018 Leia mais »

Methodology for the Evaluation and Selection of Additives for Powder Metallurgy

Abstract: This paper describes the importance of the current iron-based powder metallurgy industry additives, the introduction of the main additives of the basic functions, mechanism, key indicators, selection methods, and development trends. Keywords: powder metallurgical additives 1. The importance of additives in the iron-based powder metallurgy industry. For the iron-based powder metallurgy industry, the main raw material

Methodology for the Evaluation and Selection of Additives for Powder Metallurgy Leia mais »

Molybdenum Disulfide in the Electric Carbon Industry

Molybdenum Disulfide in the Electric Carbon Industry

Adding the right amount of molybdenum disulfide to the brushes can improve the lubrication and wear resistance of the brushes;Adding molybdenum disulfide to the brushes can work well under high temperature, high speed, and high vacuum conditions for a long time. Increase the service life of the brushes under high temperature, high speed, and high vacuum

Molybdenum Disulfide in the Electric Carbon Industry Leia mais »

Molybdenum Disulfide in the Grease Industry

Molybdenum Disulfide in the Grease Industry

Molybdenum disulfide added to the grease can improve the grease’s lubricating capacity,load-bearing capacity, and can reduce the wear and friction coefficient,in the grease film undergoes a brief impact compound or high heat, acting as a replenishment.The addition of molybdenum disulfide to grease increases the PB (maximum non-jamming load),PD (maximum sintering load) values and reduces the

Molybdenum Disulfide in the Grease Industry Leia mais »

Comparison of Lubricant Experiments

TRUER Lub-W vs. Common Lubricants 1# Lubricant: TRUER Lube-W2# Lubricant: ordinary lubricant I. Test methods. 1、How to load the boat: Iron boat with corresponding lubricant and iron cover plate (weight of lubricant).2、Sintering temperature: 600℃, gas protection 3. Do not unload the product boats after they have been baked (each boat is marked with the product).4、Weigh the residual

Comparison of Lubricant Experiments Leia mais »

pt_BRPortuguese
Rolar para cima