Truer cutting agent test reports

Share This Post

Different kinds of cutting agent containing 0.4% of FC0205 powder were added on the basis of FC0205 powder to compare their effects on material properties. The forming density of the sample was 7.0 g/m³.
I. Effect on mechanical properties



Impact on cutting performance: TD-3 and TD-4 have greatly improved the cutting performance of the material.
Cutting test conditions:
Sample diameter Φ70mm, hole to hole spacing of 3mm, 19 holes drilled per sample.


Third, the effect on the microstructure: no effect on the metallographic organization, pearlite content normal.


            Contains no cutting aids                                              Contains MnS

                                   TD-3                                                              TD-4


                                      TD-5

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Effect of heat treatment on microstructure and mechanical properties of LPBF CuCrZr

CuCrZr (C18150) alloy is a precipitation-hardening alloy known for its high mechanical, thermal, and electrical properties. The alloy is widely used in heat exchange devices and in the field of nuclear fusion.   CuCrZr alloy is a very attractive alloy that can replace pure copper in many applications, with Cr in the range of 0.5

best projector 2024年10月18日

10 Essential Steps for Effective Tungsten Prep: Unlocking the Potential of Tungsten for Industries

1. Introduction Tungsten is a highly versatile and valuable metal that finds application in various industries due to its exceptional properties. However, before tungsten can be effectively utilized, it requires proper preparation to ensure its quality, performance, and reliability. In this article, we will explore the concept of tungsten prep, its importance in different industries,

best projector 2024年9月16日
es_ESSpanish
es_ESSpanish en_GBEnglish arArabic pt_BRPortuguese
Scroll al inicio