Types of Metal Atomization Systems

Share This Post

Metal atomization is a process used to produce fine powdered metals for various industrial applications. This comprehensive guide covers everything you need to know about metal atomization technology.

Overview of Metal Atomization

Metal atomization involves breaking up a molten metal stream into very fine droplets using a high velocity gas jet. The droplets rapidly solidify into powder particles in the size range of 5 to 150 microns.

The main aspects of the atomization process include:

  • Melting metal in a crucible
  • Pouring the molten metal into a tundish
  • Creating a thin molten metal stream
  • Exposing the stream to high pressure gas jets
  • Breaking up the metal into fine droplets
  • Solidifying the droplets into powder particles
  • Collecting the powder

Atomization allows the production of metallic powders with precise control over particle size, shape, chemistry, and microstructure. The powders can then be used in applications like metal additive manufacturing, thermal spray coatings, and metal injection molding.

Key Benefits of Metal Atomization

Benefit Description
Excellent powder characteristics Atomization produces high quality powder with spherical morphology and fine grain size
Wide range of alloys Most metals and alloys can be atomized including steels, aluminum, copper, nickel, titanium etc.
Control over powder properties Atomization process parameters can be varied to tailor powder size, shape, oxidation, and microstructure
High powder yields Over 90% of the molten metal is converted into usable powder
Cost effectiveness Lower cost than other powder production methods
Scalability Atomization production capacity can be easily scaled up or down
Metal Atomization

Types of Metal Atomization Systems

There are two main types of atomization systems used – gas atomization and water atomization. The choice depends on factors like alloy properties, powder specifications, and production capacity.

Gas Atomization

In gas atomization, the molten metal stream is disintegrated by high velocity jets of an inert gas like nitrogen or argon.

Features:

  • Produces highly spherical, clean powders ideal for AM applications
  • Lower oxygen pickup compared to water atomization
  • Can accommodate reactive alloys like titanium and aluminum
  • Finer powder sizes down to 5 microns
  • Higher gas flow rates result in finer powders
  • Gas cooling rates are lower leading to coarser grain sizes

Limitations:

  • Capital and operating costs are higher
  • More complex systems with gas handling infrastructure
  • Lower powder production rates

Water Atomization

In water atomization, the molten metal stream is broken up by high pressure water jets.

Features:

  • Simple and low cost atomization technique
  • High powder production rates over 1000 kg/hour
  • Larger droplet sizes result in powder over 150 microns
  • Rapid water quenching leads to very fine grain sizes
  • Higher oxygen pickup compared to gas atomization
  • Irregular powder shapes and satellite particles
  • Not suitable for reactive alloys like titanium

Limitations:

  • Poorer powder morphology and higher oxygen content
  • Coarser powder sizes makes it unsuitable for AM
  • Water treatment required for effluents
  • Limited to lower melting point alloys

Atomizer Designs

The atomizer is the key component which creates the gas or water jets to disintegrate the molten metal stream during atomization. There are different atomizer designs used:

Simplex Nozzle

  • Single straight jet nozzle
  • Swirl flow gaz atomization
  • Economical design
  • Larger powder sizes

Multiple Nozzle

  • Several nozzles arranged in a circular configuration
  • Improved metal stream disintegration
  • Finer and more uniform powder sizes
  • Higher production rates

Close-Coupled Nozzle

  • Nozzles are positioned very close to the molten metal stream
  • Intense gas jet impact for very fine powders
  • Allows reactive alloy atomization
  • Lower production rates

Rotating Electrode

  • Spinning metal wire electrode
  • Centrifugal forces create thin molten metal ligaments
  • Surrounded by gas or water jets
  • Very fine and uniform powders
  • High complexity and maintenance

Metal Atomization Process Parameters

The properties and quality of atomized metal powders can be controlled by optimizing process parameters:

Gas Flow Rates

  • Increasing gas flow velocity results in finer powder sizes
  • Also improves powder sphericity and reduces satellite particles
  • But very high flow rates reduce powder yields

Metal Stream Flow Rates

  • Higher metal flow rates increase productivity
  • But can lead to coarser powders and irregular shapes
  • Optimize metal flow rate based on atomizer capability

Nozzle Design

  • Nozzle throat size, number of nozzles determine gas jet pressures
  • Smaller nozzle sizes give higher gas velocities for finer powders

Melt Superheat

  • Higher molten metal temperatures reduce viscosity
  • Allows disintegration into finer powder fractions
  • But excessive superheat increases material oxidation

Metal Filtration

  • Filters remove inclusions from molten metal
  • Reduces defects like satellites and irregularities
  • Improves powder flowability and packing density

Atomization Atmosphere

  • Vacuum or inert gas atmosphere reduces oxygen pickup
  • Minimizes powder oxidation especially for reactive alloys

Quench Rate

  • Faster cooling rates given finer grain sizes in powder
  • Water quenching produces very fine microstructures
  • Gas cooling is slower resulting in coarser grains

Applications of Metal Atomization

Atomized metal powders find uses in a wide range of industrial manufacturing processes:

Metal Additive Manufacturing

  • Spherical powders with good flowability are ideal for AM
  • Allows fabrication of complex, net-shape metal parts
  • Powder bed and directed energy deposition processes used

Metal Injection Molding (MIM)

  • Fine stainless steel and aluminum powders for MIM
  • Highly complex and net-shape components made via powder metallurgy
  • Automotive, electronic, and medical applications

Thermal Spray Coatings

  • Deposition of wear and corrosion resistant coatings
  • Hardfaced coatings used in machining and mining
  • Thermal barrier coatings on turbine blades

Powder Metallurgy

  • Press and sinter route for manufacturing P/M parts
  • Widely used for automotive components like gears
  • High productivity and net shape capabilities

Brazing Filler Metals

  • Joining of metals using brazing processes
  • Atomized braze alloy powders as filler material
  • Used in automotive heat exchangers

Metal Powder Injection Molding

  • Manufacturing of small, complex metal parts
  • Combination of plastic injection molding and powder metallurgy
  • Applications in electronics and medical implants
metal atomisation
PREPed Metal Powders

Specifications of Metal Atomization Powders

Atomized metal powders are characterized by various physical, chemical and microstructural properties depending on their end use.

Parameter Typical Values Test Methods
Particle size 5 to 150 μm Laser diffraction, sieve analysis
Particle shape Sphericity > 0.9 Image analysis
Chemistry Alloy composition ± 0.5% ICP-OES, LECO analysis
Oxygen content <600 ppm Inert gas fusion
Apparent density 40 to 60% of true density Hall flowmeter
Tap density 60 to 80% of true density ASTM B527
Flow rate <25 s/50 g Hall flowmeter
Residual gases H, O, N < 100 ppm LECO analysis
Microstructure Fine, equiaxed grains SEM, optical microscopy

Design Standards for Atomization Systems

Metal atomization system design, installation and operation must conform to applicable standards, regulations and guidelines:

  • ASME Boiler and Pressure Vessel Code – For pressurized vessel design
  • NFPA 86 – Standard for industrial furnaces and ovens
  • ANSI Z49.1 – Safety in welding and cutting
  • OSHA 1910 – Occupational safety codes
  • Local exhaust ventilation standards
  • Wastewater effluent guidelines for water atomization
  • ISO 9001 – Quality management systems

All equipment like crucibles, tundish, atomizers, gas manifolds must be engineered for reliability and safety. Proper protective gear and training provided to operators.

Suppliers of Metal Atomization Systems

There are many equipment suppliers that design, build and install complete atomization systems and components:

Supplier Location Technology Capacity Cost
Phoenix Scientific USA Gas, water atomization 10 – 10,000 kg/hr $$
PSI Ltd. UK Gas atomization 1 – 1000 kg/hr $$$
Burleson Technologies Inc. USA Close-coupled nozzle 1 – 20 kg/hr $$$$
ALD Vacuum Technologies Germany Electrode atomization 5 – 50 kg/hr $$$
Cremer Furnace Co. Germany Water atomization 500 – 5000 kg/hr $$

Atomization system costs range from $100,000 for lab/pilot scale units to over $2 million for large production systems. Location, capacity, features and automation determine installed costs.

Installation and Operation

Metal atomization requires extensive utilities and infrastructure for smooth operation:

  • Inert gas supplies – nitrogen, argon
  • Water supply and treatment
  • Electrical systems – high capacity, backup
  • Exhaust ventilation – spark traps, baghouse filters
  • Material handling – crucibles, transfer vessels
  • Control and instrumentation
  • Safety systems – gas detectors, fire suppression

Thorough pre-commissioning checks must be conducted before hot operation:

  • Pressure tests on gas lines and vessels
  • Electrical, ventilation and controls checkout
  • Safety system verification
  • Dry runs to confirm material flows
  • Staff training on procedures

During operation, parameters like temperature, pressure, flows are continuously monitored and controlled. Output powder size and morphology analyzed to optimize process. Water effluents treated before discharge or reuse.

Maintenance Requirements

Routine maintenance ensures availability and longevity of atomization systems:

  • Inspections of vessels, pipelines for wear and leaks
  • Replacement of damaged/eroded parts like nozzles
  • Overhauling slurry pumps, valves, instrumentation
  • Relining of equipment contacting molten metal
  • Checking heaters, thermocouples, system controls
  • Spark trap cleaning in ventilation system
  • Water treatment equipment maintenance

Proper maintenance lowers risks of leaks, blockages, electrical issues. It also minimizes unplanned downtime and improves powder quality.

How to Select an Atomization Equipment Supplier

Choosing the right atomization system supplier is critical to get high performance equipment. Below are key factors to consider during selection:

  • Proven experience – Number of successful installations and years in business
  • Technical expertise – Alloy-specific knowhow, continuous improvements
  • Customization – Flexibility to tailor system to your requirements
  • Reliability – High uptime track record, quality components
  • After-sales service – Maintenance contracts, operator training, upgrades
  • Operational support – Easy availability of spares, service engineers
  • Cost – Pricing commensurate with features, capacity, automation
  • Compliance – Conformance to safety standards, codes
  • References – Feedback from existing customers

Evaluate suppliers on the above parameters through discussions, site visits and proposal reviews. Prioritize factors like safety, reliability, support over lowest cost.

Advantages and Limitations of Metal Atomization

Metal atomization has several benefits that make it a popular powder production method:

Advantages

  • Excellent control over powder characteristics
  • High yields up to 95% conversion of metal
  • Automated, continuous operation at high rates
  • Lower cost than alternate technologies
  • Wide applicability – suitable for most alloys
  • Scalable production capacity
  • Consistent powder quality and composition
  • Spherical powders ideal for AM processes
  • Fine tuned powder properties by adjusting process parameters

Limitations

  • High capital investment required
  • Additional infrastructure for gas, water, power
  • Complex systems require specialized operators
  • Limitations with highly reactive alloys
  • Lower powder tap densities than gas atomized material
  • Secondary processing like sieving required to isolate powder fractions
  • Qualification testing needed for new alloy powders
  • Not amenable to small batch production

Gas Atomization vs Water Atomization

There are several differences between gas atomization and water atomization processes:

Parameter Gas Atomization Water Atomization
Capital Cost High Low
Operating Cost High Low
Cooling Rate Slow Very high
Oxygen Pickup Low High
Powder Morphology Highly spherical Irregular, satellites
Powder Size Very fine, 5 – 45 μm Coarser, up to 150 μm
Alloy Compatibility Most alloys Limited, lower melting point
Productivity Lower Higher
Applications AM, MIM Thermal spray, P/M

Gas atomization has higher costs but produces superior quality powders suited for AM. Water atomization is a simpler, cheaper technique but powders have higher oxygen and poorer shapes.

metal atomisation
PREPed Metal Powders

FAQs

What is metal atomization used for?

Metal atomization is used to produce fine and spherical alloy powders. These powders are used in additive manufacturing, thermal spray coatings, powder injection molding and other powder metallurgy applications.

What metals can be atomized?

Most engineering alloys including steels, aluminum, titanium, nickel, copper and their alloys can be successfully atomized. Some reactive alloys like titanium require controlled atmospheres.

What is the difference between gas and water atomization?

Gas atomization uses an inert gas jet to disintegrate the metal into fine droplets. It gives spherical powders with lower oxygen content. Water atomization uses higher pressure water jets and gives higher production rates but the powders have higher oxygen pickup.

What particle sizes can be achieved with atomization?

Gas atomization can produce very fine powder sizes down to 5 microns while water atomization gives coarser powders over 150 microns. Powder size is controlled by process parameters.

What is the typical production rate of atomization?

Lab and pilot scale gas atomizers have lower production rates in the 1-10 kg/hr range. High capacity water atomization units can produce over 1000 kg/hr of powder.

What industries use atomized metal powders?

The major consuming industries are aerospace, automotive, medical, electronics, and oil and gas. The powders are used to manufacture finished components via additive manufacturing, metal injection molding and thermal spray processes.

How much does an atomization system cost?

Atomization system costs start from around $100,000 for lab scale units but high capacity production systems can cost over $2 million. Cost depends on capacity, features, automation and ancillary equipment.

What safety precautions are required for atomization?

Atomization involves handling of molten metal, high pressure gases and water. Operators require extensive training and appropriate protective equipment. Safety systems for gas detection, fire suppression, electrical isolation and emergency ventilation are critical.

know more 3D printing processes

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Effect of heat treatment on microstructure and mechanical properties of LPBF CuCrZr

CuCrZr (C18150) alloy is a precipitation-hardening alloy known for its high mechanical, thermal, and electrical properties. The alloy is widely used in heat exchange devices and in the field of nuclear fusion.   CuCrZr alloy is a very attractive alloy that can replace pure copper in many applications, with Cr in the range of 0.5

10 Essential Steps for Effective Tungsten Prep: Unlocking the Potential of Tungsten for Industries

1. Introduction Tungsten is a highly versatile and valuable metal that finds application in various industries due to its exceptional properties. However, before tungsten can be effectively utilized, it requires proper preparation to ensure its quality, performance, and reliability. In this article, we will explore the concept of tungsten prep, its importance in different industries,

es_ESSpanish
Scroll al inicio