Powder Metallurgy Additive

Powder Metallurgy Cutting Agent TD-8

Color: Gray
Shape: Powder
Brand Name: Truer
Product name: TD-8
Application: cutting agent
Place of Origin: Shanghai, China
Category: powder metallurgy cutting agent
Price: For a more detailed quote, please send us an inquiry.

Product Features

TD-8 is a drilling type manganese sulfide specially developed for deep hole drilling and stranding needs, and the improvement of drilling is very obvious.

Drilled Manganese Sulfide

This product improves drilling very significantly.

High-Temperature Stability

The product is chemically stable and resistant to high temperature above 1200℃; it will not have chemical reaction with sintering atmosphere and surrounding matrix during the sintering process, thus ensuring the cutting performance after sintering.

Chip Mechanis

Fine cutting agent particles can be attached to the surface of the matrix powder, after sintering, diffuse distribution of each pore inside and embedded in the shallow surface layer, can preserve the mechanical properties while accelerating the chip fragmentation, to prevent the cutting edge is covered caused by red thermal wear.

Good Dispersion

The cutting agent is easily and evenly dispersed into the powder to ensure stable and consistent cutting results in all areas

Dimensional Stability
The cutting agent has little effect on the dimensional changes of the sintered parts,
which helps to maintain the dimensional accuracy of the product.

Surface Cleanliness
Sintered parts have a clean, shiny appearance and will not produce additional spots, which can lead to rusting.

Product Description
Fine granularity, gray powder.

Product Specification
Control indicators Norm
Heat loss Max 0.8%
Particle size D90 < 25microns
Active ingredient content >99%
Apparent density >2.0g/cm³

Storage Conditions
Controlled humidity and temperature control (humidity below 50%, and temperature below 35°C),
sealed after use, storage time no longer than six months.

Recommended for mixing
1. The weight percentage is between 0.4～0.5.
2. Weighing in a closed environment, suitable for double cone and V type mixer.

Packing and Transportation
1. Packaging: 25kg net barrel. 2.
2. Transportation: non-dangerous goods, suitable for normal land, sea and air transportation.

Production Process

About Truer

Shanghai Truer

Powder Metallurgy Additive Manufacturer

Shanghai Truer Industrial Development Co., Ltd. is an entity that integrates research and development, production, and sales. The excellent team is the cornerstone of our success, in 2007, we set up a research and development team, after in-depth research, Truer has set up two divisions, the Metallurgical Division and the Powder Metallurgy Additives Division.

TRUER Powder Metallurgy Additives Division is acknowledged to be one of the most professional additive suppliers in the Chinese powder metallurgy industry and committed to providing complete additive solutions to PM customers. TRUER has developed a variety of powder metallurgy, lubricants Lube-W, SUW-5000B, SUW-8000; cutting agent manganese sulfide, sulfur-free cutting agent SME-100, composite cutting agent TD-8; new soft magnetic additives QH-150; QHP-330 graphite TBC-400; TBC-1000 and so on. These raw materials are all supplied and customized by famous manufacturers

Years Experience

Products

Tursted Customers

Square meters

Production Process

TRUER Metallography Division TRUER Metallography is focusing on the production, development, and sales of metallographic equipment and consumables. TRUER has been committed to becoming the most professional supplier of metallographic equipment and consumables in China and the world. Through continuous exploration and development, we have successfully developed professional solutions for the analysis of different target materials and established a perfect product system, which covers metal, ceramics, electronics, plastics, and other major industries, and our high-quality products combined with perfect technical service are highly praised by the metallographic industry.