Molybdenum disulfide lubricant is a spray lubricant made of ultra-fine molybdenum disulfide base material that forms a fast-drying film on the metal surface.

Molybdenum disulfide dry lubricant has a low coefficient of friction and can be sprayed to form a tough, heat-resistant, heavy-duty molybdenum disulfide lubricant film on the friction surface of metal parts, thus avoiding wear, ablation, and galling of parts. This molybdenum disulfide lubricant is designed to lubricate slides, screws, rails, connecting rods, and general machinery where maintenance is difficult, and the temperature of lubrication and anti-caking can reach up to 450°C. The molybdenum disulfide lubricant acts as a lubricant in all areas of the machine.
The purpose of the grease is to form a film of oil on the surface of each part to prevent damage to the product from direct wear between parts. But some situations may not be able to form a complete lubricating film, such as product frequent start-stop, impact load or load is too large, can not form a complete lubricating film or lubricating film thinning, rupture, this product in operation for the parts of the injury is very big, so in the choice of such products, grease will often use a good extreme pressure anti-wear and lubricating grease. This can reduce damage failure and improve the operating effect.

Common greases generally have the following properties.
1, has good load resistance, in the heavy load or impact load conditions, the grease formed by the lubricant film is not easy to thin, rupture, and can maintain sufficient film thickness, to prevent dry parts friction, and extend the service life of parts.
2, excellent lubricating performance and noise reduction, can make lubricating parts with low friction coefficient, thus reducing power consumption and operation noise, and improve the reliability of the parts.
3, has good thermal stability and low-temperature performance, can avoid the loss of high-temperature operation of grease, volatile degeneration, low temperature with good fluidity and pumping sex.
4, good corrosion resistance and rust protection ability, can effectively protect metal parts from external erosion, reduce maintenance costs.
5, excellent oxidation resistance and very low volatility, long lubrication life, can significantly save the cost of grease consumption, and long lubrication cycle can enhance the protection of parts, reduce the probability of product damage.
6, has good adhesion performance, in the low speed or collision can also ensure that the grease does not drip, not thrown out, to maintain good lubrication sealing effect.
7, higher cleanliness, ensure no pollution, no peculiar smell, green environmental protection, can be assured of use, the shelf life of 6 years.