316 Stainless Steel Powder

Share This Post

316 stainless steel powder is a specialized material with a range of uses in industries from aerospace to biomedical. This guide provides a detailed overview of 316 stainless steel powder including its composition, properties, applications, grades, specifications, pricing, pros/cons, and more.

Composition of 316 Stainless Steel Powder

The elemental composition of 316 stainless steel powder is:

Element Weight %
Iron (Fe) Balance
Chromium (Cr) 16-18%
Nickel (Ni) 10-14%
Molybdenum (Mo) 2-3%
Manganese (Mn) <2%
Silicon (Si) <1%
Phosphorus (P) <0.045%
Sulfur (S) <0.03%
Carbon (C) <0.08%
Nitrogen (N) <0.1%

The high chromium and nickel content give 316 stainless its corrosion resistance. Molybdenum further enhances this property. The powder composition conforms to ASTM specifications for 316/316L grade with less than 0.08% carbon.

Overview of Properties and Characteristics

316 stainless steel powder offers an exceptional combination of properties:

Property Significance
Excellent corrosion resistance Durability across range of chemical exposures
Outstanding strength Can be sintered into high-strength parts
Bio-compatibility Safe for use in medical devices/implants
Heat resistance Retains strength and stability at high temperatures
Weldability Easy to fuse components made from this powder
Machinability Sintered/+dewaxed parts can be machined, drilled, tapped etc
Magnetism Slightly magnetic due to nickel content

These properties enable usage across a wide variety of applications and industries.

316 stainless steel powder

Applications and Uses of 316 Stainless Steel Powder

Some typical applications of 316 stainless steel powder include:

Industry Applications
Aerospace Engine components, fittings, fasteners
Automotive Valves, powdered metal parts
Chemical processing Pumps, valves, tanks, pipes
Oil and gas Wellheads, manifolds, downhole tools
Biomedical Implants, surgical instruments, devices
3D printing Aerospace and automotive prototypes

The corrosion resistance, strength and fabrication versatility make 316 stainless useful for demanding mechanical and structural applications. The biocompatibility enables medical uses as well.

Grades and Specifications of 316 Stainless Steel Powder

316 stainless steel powder is available in standard grades:

Grade ASTM Specification Notes
316 ASTM A240, A276, A479 Standard molybdenum-bearing grade
316L ASTM A240, A276, A479 Low carbon variant, better welding

Popular size distributions:

Mesh Range Micron Range
-140+325 mesh 44-104 microns
-325 mesh <44 microns

Both gas atomized and water atomized powders are common. Custom particle size distributions are available.

Pricing for 316 Stainless Steel Powder

Distributor Price Per Kg
Atlantic Equipment Engineers $25 – $60
Sandvik Osprey $45 – $150
Carpenter Powder Products $40 – $100
Höganäs $30 – $80
Kymera International $35 – $90

Prices vary based on quantity ordered, size distribution, production method (gas vs. water atomized), supplier terms and location.

Pros vs Cons of 316 Stainless Steel Powder

Pros Cons
Excellent corrosion resistance Expensive compared to carbon steel powder
High strength-to-weight ratio Surface oxidation can occur during sintering
Very fine particles achievable Needs good venting/atmosphere control when sintering
Custom alloy grades available More difficult to compact into green parts vs. iron powder
Range of suppliers globally  

For critical applications where properties outweigh costs, 316 stainless powder delivers performance.

Frequently Asked Questions

Q: What particle size 316L powder is best for laser sintering AM?

A: Generally less than 45 microns (-325 mesh) is preferred, with D90 under 35 microns ideal.

Q: What is the typical tapped density for 316L stainless steel powder?

A: Between 4.0 to 4.8 g/cc based on the atomization method and particle size distribution.

Q: Is stainless steel powder reusable after sintering?

A: Yes, unused oversize powder can be salvaged and sieved for reuse if handled properly to avoid contamination.

Q: Does 316L powder require sintering in vacuum or inert atmospheres?

A: Vacuum or argon/nitrogen atmosphere is recommended during sintering to prevent surface oxidation effects.

Conclusion

With its corrosion resistance, strength, and fabrication versatility, 316/316L stainless steel powder is a material of choice across applications from biomedical implants to aerospace components. Understanding its detailed composition, properties, specifications and sintering considerations allows engineers to leverage the benefits of this material.

know more 3D printing processes

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

10 Essential Steps for Effective Tungsten Prep: Unlocking the Potential of Tungsten for Industries

1. Introduction Tungsten is a highly versatile and valuable metal that finds application in various industries due to its exceptional properties. However, before tungsten can be effectively utilized, it requires proper preparation to ensure its quality, performance, and reliability. In this article, we will explore the concept of tungsten prep, its importance in different industries,

8 Advantages of EBM Manufacturing: Exploring High Precision, Design Freedom, and Cost Efficiency

1. Introduction In the world of manufacturing, technological advancements continue to revolutionize the way products are made. One such innovation is Electron Beam Melting (EBM) manufacturing, which offers numerous benefits over traditional manufacturing methods. This article explores the concept of EBM manufacturing, its advantages, the manufacturing process involved, its applications across various industries, challenges faced,

pt_BRPortuguese
Rolar para cima