Double Disc Manual Grinding & Polishing Machine
FlatBase 60+FlatHead 10/10x2
FlatBase60+FlatHead-10/10×2 is a manual double-disc stepless speed-adjustable grinding and polishing machine in the FlatSystem combined grinding and polishing machine. FlatBase60+FlatHead-10 (referred to as “F60+F10”) is a dual-disc single-controller, and FlatBase60+FlatHead-10×2 (referred to as “F60+F10×2”) is a dual-disc, dual-control grinding and polishing machine. That is, grinding and polishing can be done in the same machine, and can be operated by two people at the same time. The machine is equipped with a water cooling device, which can perform multiple sample preparation steps from rough grinding to fine polishing of the sample.
- Double disc stepless speed regulation
- Thickened all-aluminum lower turntable
- The speed varies with the adjustment
- Cone disk system
- water bowl design
The all-aluminum lower turntable with thick design is thick and stable. The support and rotation are more stable, and the large-mass chassis has enough heat capacity to hedge the temperature rise, which can prevent the sample from overheating during rough grinding.
Conical disk system, can quickly remove the grinding disk, easy to clean, help save time
To meet changing needs, equipment can be upgraded in the future with semi-automatic or automatic retrofits
The speed varies with the adjustment
FlatBase60+FlatHead-10 double disc and single control, FlatBase60+FlatHead-10×2 is a double disc double control grinding and polishing machine, the speed can be adjusted between 100~500 r/min, and it can change with the adjustment. (No need to stop the machine to adjust the speed)
water bowl design
It can prevent the abrasive grains from flowing into the sewer and causing dug. And can easily complete the cleaning, always keep the sink clean and clean.
Free bending, unconstrained cleaning range, adjustable height