3D Printing Inconel 625

Share This Post

3d printing inconel 625 is a nickel-chromium-molybdenum alloy with excellent high temperature strength and corrosion resistance. This makes it well-suited for 3D printing complex geometries for demanding applications. This guide provides an overview of composition, properties, parameters, and uses of 3D printed Inconel 625.

Introduction to 3d printing inconel 625

Inconel 625 is a high performance superalloy frequently used for additive manufacturing across aerospace, marine, nuclear, and chemical industries. Key properties include:

Table 1: Overview of 3D printed Inconel 625 material

Properties Details
Nickel Content 58-63%
High Strength Tensile strength 1,310 MPa
Temperature Resistance Up to 1,400°F or 760°C
Corrosion Resistance Highly resistant to heat, acids, alkaline
Crack Resistance Excellent fatigue strength and toughness
Workability Readily weldable for joining
Common Uses Aerospace, marine, industrial applications

3D printing enables fabricating complex Inconel 625 parts unattainable with traditional methods. Continuing reading for details on composition, characteristics, printing process parameters, applications and more.

3d printing inconel 625

Chemical Composition of 3d printing inconel 625

The Inconel 625 alloy chemistry includes nickel, chromium, molybdenum, niobium and iron:

Table 2: Inconel 625 alloy composition

Element Weight %
Nickel (Ni) 58.0 – 63.0 %
Chromium (Cr) 20.0 – 23.0 %
Molybdenum (Mo) 8.0 – 10.0 %
Niobium (Nb) 3.15 – 4.15 %
Iron (Fe) Remainder
Carbon (C) ≤ 0.10%
Manganese (Mn) ≤ 0.50%
Silicon (Si) ≤ 0.50%
Phosphorus (P) ≤ 0.015%
Sulfur (S) ≤ 0.015%
Aluminum (Al) ≤ 0.40%
Titanium (Ti) ≤ 0.40%
Cobalt (Co) ≤ 1.0%

This carefully optimized nickel-chromium matrix provides an exceptional combination of heat and corrosion resistance while retaining ductility, fatigue strength, and weldability.

Mechanical Properties of 3D Printed Inconel 625

The mechanical properties of Inconel 625 make it suitable for demanding applications:

Table 3: Inconel 625 mechanical properties

Property Value
Density 8.44 g/cm3
Melting Point 2,300-2,460°F (1,260-1,350°C)
Tensile Strength 125,000 – 240,000 psi
Yield Strength (annealed) 110,000 psi min
Elongation 30% minimum
Young’s Modulus 29 x 10^6 psi
Poission’s Ratio 0.29
Fatigue Strength 110 – 129 ksi
Fracture Toughness 200 ksi√in
Hardness ~35 HRC

The combination of strength, cracking resistance, thermal properties, and corrosion resistance enable Inconel 625 to endure extreme environments.

Key Benefits of Inconel 625 for 3D Printing

3D printed Inconel 625 offers major advantages:

Table 4: Advantages of 3D printing Inconel 625 parts

Benefits Description
High strength-to-weight ratio As strong as steel at a fraction of the weight, saving costs
Withstands extreme temperatures Retains mechanical properties from cryogenic to 1,400°F
Corrosion resistance Excellent chemical resistance to acids, alkaline solutions up to 1,400°F
Crack resistance High fatigue strength resists fracture failure
Thermal stability Low coefficient of thermal expansion avoids distortion
Food safe Approved for food processing equipment with no leaching
Custom alloys Can customize chemistry for application requirements
Complex geometries Print intricate shapes unattainable with fabrication
Consolidated assemblies Print complex assemblies without welding, reducing costs
Rapid iteration Engineer, test, adapt parts through rapid prototypes

These advantages expand design possibilities and enable lighter, stronger and longer-lasting components.

Recommended 3D Printing Parameters for Inconel 625

Here are typical process parameters when printing Inconel 625 parts on laser powder bed fusion and directed energy deposition systems:

Table 5: Inconel 625 standard 3D printing parameters

Parameter Typical value
Layer thickness 20 – 100 microns
Laser power Up to 500 W
Scan speed 800 – 1200 mm/s
Beam diameter 50 – 200 microns
Powder size 15 – 45 microns
Print orientation 45° angles
Support structures Mandatory
Annealing Optional 2,100 – 2,300°F for 2 hrs

Settings must balance density against residual stresses. Following established methods like ASTM F3056 minimizes cracking and distortions. Let’s look at common applications next.

Applications of 3D Printed Inconel 625 Parts

Common uses of additively manufactured Inconel 625 across industries include:

Table 6: Inconel 625 3D printing applications

Industry Applications Components
Aerospace Structural brackets, engine components, hydraulic systems Turbine blades, rocket nozzles, exhaust manifolds, fuel elements
Oil and gas Downhole tools, valves, wellhead systems Drill bits, wireline tools, Christmas trees
Automotive Turbochargers, exhaust components Manifold, supercharger rotor housing, turbo impellers
Chemical processing Heat exchangers, reaction vessels, pipe fittings Pipe spools and elbows, mixing blades, process equipment
Food and pharmaceutical Mixers, dryers, heaters, conveyors Bearings, shafts, fasteners, connectors
Marine Propulsion components, desalination systems Pumps, impellers, couplings, valves
Power generation Heat exchangers, steam system components Headers, superheater tubing, condenser tubes

3D printing enables lighter, stronger and custom Inconel 625 parts consolidating complex assemblies across demanding applications, driving adoption in critical systems.

3d printing inconel 625

Material Options for 3D Printing Inconel 625

Popular Inconel 625 alloy options for additive manufacturing include:

Table 7: Common 3D printing Inconel 625 material formats

Type Description Key Properties
Inconel 625 Standard Most widely used grade for additive Tensile strength 1050 MPa, rupture strength 760 MPa at 980°C
Inconel 625 Ultra Higher density and ductility 30% increased yield and tensile strength
Inconel 718 Heat resistant aerospace grade Excellent strength and hardness >540°C
Custom 625 alloys Application-specific custom chemistry Enhanced emissivity, conductivity, magnetism etc

Specialized Inconel powders optimize particle shape, size and chemistry to boost 3D printing success.

Inconel 625 3D Printing Standards

Key standards for qualifying 3D printed Inconel 625 parts and powders:

Table 8: Inconel 625 alloy 3D printing standards

Standard Description
ASTM F3056 Standard specification for additive manufacturing nickel alloy
ASTM B946 Standard for detection of defects
AMS 2801 Heat treatment of nickel alloys
AMS 5662 Laser powder bed fusion process requirements
ISO/ASTM 52900 General principles for design and manufacture

Certifying printed Inconel components per these specifications ensures high quality and reliability for service.

Suppliers of Inconel 625 for 3D Printing

Leading suppliers of Inconel 625 metal powders include:

Table 9: Inconel 625 powder suppliers

Supplier Description Pricing
LPW Technology Wide alloy range, custom particle optimization $$$
Sandvik Osprey Standard and custom nickel alloy powders $$$
Erasteel Broad superalloy material portfolio $$
AMG Superalloys UK Specialize in nickel alloys $-$$
Tekna Advanced plasma spheroidization process $$$

These premium alloy specialists fine-tune Inconel 625 particle size, shape, chemistry and defects to ensure printing success.

Pros vs Cons of 3D Printed Inconel 625

Table 10: Advantages and limitations of Inconel 625 3D printing

Pros Cons
Withstands 1800°F temperature swings More costly than steel or aluminum
Five times more fracture resistant than steel Requires heat treatment to relieve stresses
Half the density of steel Susceptible to micro-cracking without optimization
Resists hot corrosion and pitting Hard to print overhangs requiring supports
Bio-compatible for food and medical uses Limited large-scale suppliers and printers
Print complex geometries consolidating assemblies Post-processing can be challenging

With sound process practices, the tremendous performance benefits of 3D printed Inconel 625 outweigh higher part costs.

FAQ

Q: What causes cracking when printing Inconel 625?

A: High cooling stresses from large thermal gradients lead to cracking. Proper support structures, optimized process settings, pre/post-heat treatment, and machining reliefs all help minimize cracking.

Q: Does 3D printed Inconel 625 require heat treatment?

A: Optional heat treatment relieves internal stresses, enhancing mechanical properties and crack resistance. Annealing at 1900-2100°F for 1-3 hours is typical based on section thickness.

Q: What surface finish can be expected on as-printed Inconel 625 parts?

A: Raw surface finish ranges from 250-500 microns Ra depending on print parameters. Additional machining, grinding, polishing or electropolishing can enhance surface finish requirements.

Q: Can you weld 3D printed Inconel 625?

A: Yes, Inconel 625 can be readily welded using GTAW, electron beam or laser welding methods for joining 3D printed assemblies or modifying components. Proper fixturing is critical to avoid distortions.

know more 3D printing processes

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Effect of heat treatment on microstructure and mechanical properties of LPBF CuCrZr

CuCrZr (C18150) alloy is a precipitation-hardening alloy known for its high mechanical, thermal, and electrical properties. The alloy is widely used in heat exchange devices and in the field of nuclear fusion.   CuCrZr alloy is a very attractive alloy that can replace pure copper in many applications, with Cr in the range of 0.5

10 Essential Steps for Effective Tungsten Prep: Unlocking the Potential of Tungsten for Industries

1. Introduction Tungsten is a highly versatile and valuable metal that finds application in various industries due to its exceptional properties. However, before tungsten can be effectively utilized, it requires proper preparation to ensure its quality, performance, and reliability. In this article, we will explore the concept of tungsten prep, its importance in different industries,

arArabic
Scroll to Top